|
  GearTeq
for SolidWorks
2006-08, CAMWorks Solids and PowerCAM
Build 2008-160-188 released on 04/16/2008
GearTeq is now
available.
PDF of GearTeq screen shots.
GearTrax for
SolidWorks 2004 through 2008
Build 2008-160-624 released on 04/22/2008
 CamTrax
for SolidWorks 2004 through 2008
Build 2008.160.423 released on 02/04/2008
Attention und users under the support and maintenance plan: A new registration
code may be required.
Now with conjugate disk cams!
Simple Disk Cam Tutorial
 GearTraxSE
for Solid Edge V16 through V20
Build 2007-200-610 on 09/14/2007, Size 8,239,616 bytes
CamTraxSE
for Solid Edge V16 through V20
Available NOW! (This
release does not create a complete solid model of barrel cams.)
Build 2007-200-410 on 09/14/2007, Size 5,480,449 bytes
Enhancement document for CamTraxSE
GearTeqAI for
AutoDesk Inventor 2009
Build 2009-13-186 released on 04/11/2008
GearTraxAI for
AutoDesk Inventor 2009
Build 2009-13-618 released on 04/09/2008
Purchase GearTraxAI for Inventor and you will receive all versions of GearTraxAI
at no additional cost.
GearTraxAI for
AutoDesk Inventor 2008
Build 2008-12-616 released on 11/27/2007
Purchase GearTraxAI for Inventor and you will receive all versions of GearTraxAI
at no additional cost.
GearTraxAI for
AutoDesk Inventor V11
Build 2006-110-546 on 11/15/2006, Size 9,434,112 bytes
Purchase GearTraxAI for Inventor and you will receive all versions of GearTraxAI
at no additional cost.
Enhancement document for GearTraxAI
GearTraxAI for
AutoDesk Inventor V10
Build 2006-100-600 on 03/13/2007, Size 9,438,208 bytes
Purchase GearTraxAI for Inventor and you will receive all versions of GearTraxAI
at no additional cost.
Enhancement document for GearTraxAI
CamTraxAI
for
AutoDesk Inventor 2009
Build 2008-130-423 on 04/09/2009, Size 7,235,584 bytes
Purchase CamTraxAI for Inventor and you will receive all versions of CamTraxAI
at no additional cost.
Now with conjugate disk cams!
CamTraxAI
for
AutoDesk Inventor 2008
Build 2008-120-422 on 01/10/2008, Size 7,235,584 bytes
Purchase CamTraxAI for Inventor and you will receive all versions of CamTraxAI
at no additional cost.
Now with conjugate disk cams!
CamTraxAI
for
AutoDesk Inventor V11
Build 2008-110-422 on 01/11/2008, Size 6,677,504 bytes
Purchase CamTraxAI for Inventor and you will receive all versions of CamTraxAI
at no additional cost.
Now with conjugate disk cams!
CamTraxAI
for
AutoDesk Inventor V10
Build 2006-100-383 on 11/17/2005, Size 7,000,064 bytes
Purchase CamTraxAI for Inventor and you will receive all versions of CamTraxAI
at no additional cost.
CamTraxMFG
a stand-alone version of our cam software
Now with conjugate disk cams!
Build 2008.0.423 on 04/09/2008, Size 4,874,752 bytes
Top
| 
